Three-zone rear and side blind spot monitoring for indoor warehouses and busy material-handling operations.
Application illustration — recommended rear, left and right monitoring positions. Camera coverage and warning zones are subject to actual installation and calibration.
Improve Pedestrian Awareness Around Electric Forklifts
Electric counterbalance forklifts are commonly used in warehouses, distribution centers and manufacturing facilities. Battery-powered operation is generally quieter than that of combustion-engine forklifts, but quiet travel does not remove rear and side blind spots. At rack intersections, loading points and shared aisles, people may approach from several directions while operators are reversing or turning.
EWAY’s proposed electric forklift pedestrian detection system combines three EW-AI868 AI cameras with one EW-M7510 7-inch multi-channel monitor. Each camera monitors a selected rear or side area, helping operators see nearby activity and recognize pedestrians within configured detection zones.
Common Blind Spots and Pedestrian Risks
- Rear blind spots during reversing, especially near the counterweight and stacked pallets.
- Side approach areas when pedestrians emerge from shelving or cross an aisle.
- Warehouse intersections where the operator’s view is temporarily blocked by inventory, racks or nearby vehicles.
- Relatively quiet electric operation, which can make awareness especially important in shared pedestrian traffic areas.
Recommended EWAY Three-Camera AI Solution
Three EW-AI868 cameras are proposed near the rear and left/right positions of the forklift overhead guard, with angles adjusted to cover the relevant ground-level zones. Video from the three cameras connects to the EW-M7510 monitor for multi-view observation. The camera’s AI processing supports pedestrian detection in the areas each camera is configured to monitor. This is multi-zone monitoring, not a stitched 360-degree surround-view system.
| Component | Proposed quantity / model | Purpose |
|---|---|---|
| Rear AI camera | EW-AI868 × 1 | Rear reversing and pedestrian awareness |
| Left AI camera | EW-AI868 × 1 | Left-side pedestrian approach area |
| Right AI camera | EW-AI868 × 1 | Right-side pedestrian approach area |
| Vehicle monitor | EW-M7510 × 1 | 7-inch multi-channel live video display |
| Connections & brackets | 3 compatible camera cables + mounts | Camera-to-monitor connection and secure fitting |
| Optional warning accessory | EW-MD201 (subject to integration review) | Additional audible/visual warning |
Key Features and Benefits
- Three-direction monitoring: view rear, left and right blind-zone camera feeds on one display.
- Camera-side AI pedestrian detection: each EW-AI868 uses 2.4 TOPS edge AI processing for supported recognition tasks.
- Multi-channel viewing: EW-M7510 supports four video inputs, leaving a spare input in this proposed three-camera arrangement.
- Industrial protection: EW-AI868 is listed at IP69K and EW-M7510 at IP66 in EWAY’s published product specifications.
- Flexible OEM and retrofit design: proposed camera positions, cable lengths and warning configuration can be adapted to the vehicle.
Suggested Installation Positions
Rear camera: rear-facing on the overhead guard rear crossbar where mounting clearance and visibility allow. Left and right cameras: secure upper positions with each lens directed outward and downward toward the selected side monitoring zone. Confirm that mounting and cabling do not compromise overhead clearance, operator access, load-handling visibility or the protective function of the overhead guard. The final camera position and detection angles require real-vehicle testing.
Technical Configuration at a Glance
| Specification | Recommended system |
|---|---|
| System | EW-AI868 × 3 + EW-M7510 × 1 |
| AI processing | 2.4 TOPS per EW-AI868 camera |
| Detection targets | Pedestrians and vehicles, in supported configured conditions |
| Monitor | EW-M7510, 7-inch, 1024 × 600 |
| Monitor video inputs | 4 channels; 3 proposed in use |
| Supported monitor video | AHD 1080P / 720P / CVBS (according to published specifications) |
| Monitor power | DC 10–32 V (check forklift electrical system) |
| Camera / monitor protection | EW-AI868 IP69K / EW-M7510 IP66 |
| External alarm | Optional; trigger integration to be verified |
Related EWAY Products and Camera Solutions
For a published example of the EW-M7510 monitor with multiple EW-AI868 AI cameras, see EWAY’s four-camera large-forklift system:
Explore EWAY’s Four-Camera Large-Forklift AI System
For an EW-M7510 + EW-AI868 product combination and individual specifications, see:
EW-M7510 7-Inch Quad-Split Rear View Monitor
EW-AI868 AIVUE AI Backup Camera
The three-camera electric-forklift configuration described here is a proposed application solution, not the same package as the published four-camera large-forklift product.
Frequently Asked Questions
Why add AI pedestrian detection to an electric forklift?
A camera system can provide another source of visual awareness in shared pedestrian and forklift areas. AI detection can help highlight supported targets inside monitored zones, but it does not replace the operator’s checks or site traffic controls.
Does an electric forklift need three cameras?
Not necessarily. One rear camera may be sufficient for a rear-only visibility requirement. Three cameras are proposed when rear and both side areas need separate monitoring.
Where should the side cameras be installed?
Candidate positions are near the left and right upper guard structure with downward/outward angles. Exact placement depends on the forklift geometry, sight lines and installation constraints.
Is this a 360-degree forklift camera system?
No. Three separate camera views monitor selected rear and side areas; blind spots may remain between the fields of view.
Can the cameras trigger a sound or warning light?
An optional EW-MD201 alarm may be considered, but electrical interface, trigger logic and simultaneous warnings from three AI cameras must be verified for the intended project.
Request a Custom Electric Forklift Camera Solution
EWAY supports OEMs, distributors and fleet retrofit projects with camera, monitor, cable and mounting configurations. Share your forklift model, photos, operating conditions and monitoring priorities to discuss a proposed system and sample evaluation.